Boson Rapid SARS - COV-2 Single Antigen Test Kit 1N40C5-2
*Safety Data Sheet - View Here
- Sample type: Antigen nasal swab
- Time to result: 15-20 min
- Sensitivity: 96.77%
- Specificity: 99.20%
- Accuracy: 98.72%
- 99.10% of non-professionals carried out the test without requiring assistance
- 97.87% of different types of results were interpreted correctly
|
More Items To Consider
Product Specification
- Product Code
- H44308708
- Pack Size
- Single Pack
- Type
- Medical Test Kits
- Pack Size
- Single Pack
- Brand
- Boson Biotech
Product Details
- Boson Rapid SARS - COV-2 Single Antigen Test Kit 1N40C5-2
Self-test received notified body approved CE marking on April 1, 2021.
Antigen Test Specifications:
- Sample type: nasal swab
- Time to result: 15-20 min
- Sensitivity: 96.77%
- Specificity: 99.20%
- Accuracy: 98.72%
- 99.10% of non-professionals carried out the test without requiring assistance
- 97.87% of different types of results were interpreted correctly
- Rotate the lid of sample extraction buffer bottle. Caution: Open it away from your face and be careful not to spill any of the liquid.
- Squeeze all extraction buffer out of the bottle into the extraction tube. Caution: Avoid touching the bottle against the tube.
- Squeeze all extraction buffer out of the bottle into the extraction tube. Caution: Avoid touching the bottle against the tube.
- Carefully insert swab into one nostril. The swab tip should be inserted no less than 2.5 cm (1 inch) from the edge of the nostril. Roll swab 3-4 times along the mucosa inside the nostril.
- Leave swab in the nostril for several seconds. Using the same swab, repeat this process for the other nostril.
- Withdraw swab from the nasal cavity. Caution: This may feel uncomfortable. Do not insert the swab any deeper if you feel strong resistance or pain.
- Place swab into extraction tube. Roll swab three to five (3-5) times. Leave swab in extraction buffer for 1 minute.
- Pinch extraction tube with fingers and remove the solution from swab as much as possible.
- Install the nozzle cap onto the sample extraction tube tightly.
- Bring the kit components to room temperature before testing. Open the pouch and remove thecard. Place the card on a flat and level surface. Caution: Once opened, the test card must beused immediately..
- Invert the extraction tube and add 3 drops of test specimen into the specimen well (S) by gently squeezing the extraction tube. Caution: The formation of air bubbles in thespecimen well (S) must be avoided..
- Read the results at 15-20 minutes. Caution: Results after 20 minutes may not beaccurate