Compact Folding Truck With Rubber Wheels Capacity 90kg 356193

Ideal for heavy duty and industrial use, this lightweight compact truck has a maximum load capacity of 125kg. The truck has an extendable back and a folding foot plate, making it easy assembled and fold down for storage or hanging when not in use. This compact truck measures 490x490x1015mm (WxDxH).

		Trolley Type- Sack Truck Folding trolleys, stair trolleys, cylinder trolleys, sack trucks and even 2 or 3 way trolleys, there is a type of hand truck to meet every need. Telescopic handle with simple spring release mechanism.Folding hand truck for easy transportation. H x W x D: overall - 1100 x 380 x 410mm, folded - 730 x 380 x 190mm.
		Aluminium Trolley When choosing a trolley, you need to decide what material will best suit your needs: steel frame aor lightweight aluminium. Manufactured fromStrong aluminium frame with a handy folding steel toe plate, this truck is simple to operate, durable material for long lasting use. Lightweight aluminium frame and telescopic handle.
		Trolley Colour Silver colour truck.
		Trolley Weight This steel truck weights 6.5kg.
		Trolley Capacity As you would expect, Trolleys are designed and constructed to safely hold a specific amount of weight borne by a person and any load they are carrying. This truck has maximum load of 125kg for transporting heavy goods.
		Rubber Tyred Wheels On 155mm diameter grey rubber tyred non-marking wheels.
		Footplate Folding Footplate - 355 x 240mm.

 

Safety Trolley Tips

PERSONAL PROTECTIVE EQUIPMENT 

-Gloves that increase ability to grip cases.Footwear with protective toe and midsole.

 BEST PRACTICES

-For large quantity loads provide a four-wheel platform-style cart or a two-wheel hand truck that converts to a four-wheel platform-style truck.This will minimize bending the torso. Use a two-wheel truck with an adjustable toe plate – adjust the toe plate to approximately knee height to minimize torso bending. Keep your body centered between the side rails of the ladder at all times.

INCLINES

-When pushing up an incline the employee frequently has to lower the angle of the load to generate enough force to push the load upthe slope. Lowering the load angle increases the amount of weight the employee must lift. In addition to providing force in a horizontal direction, the employee must now provide force in a vertical direction. This places additional stress on the shoulders, back and legs. Provide a fold down third wheel on the backof the hand truck so the load can be selfsupporting. This ensures that the employee must only provide force in a horizontal direction. 

KERBS AND STAIRS

-Employees who deliver to locations without docks must pull fully loaded hand trucks over uneven walking surfaces, up and over curbs and up stairways. Provide and use kerb ramps. Kerb ramps allow for easy movement over uneven walking surfaces eliminating the need to lift and pull fully loaded hand trucks. -Use trucks that have several doors on the side so loads can be accessed by means other than the back door. A short ramp from a side door could eliminate pulling the hand cart up steps and kerbs. 

 MAINTENANCE

-A poorly maintained hand truck will greatlyincrease physical stress on an employee. When hand truck tires are under or unevenly pressurized, the employee's arms, back, and legs must provide more force to move the hand truck. Keep balloon tires in good repair and properly inflated. Check tire pressure on a quarterly basis or more often if needed. Make available to the employees a pressure gauge, air compressor, and pressure hose. Hard rubber tires do not have the air pressure problems associated with balloon tires. However, hard rubber tires do not move very well over rough terrain.