D-Link DES 1016D - Switch - unmanaged - 16 x 10/100 - desktop
- Full/half duplex support for each port
- MDI uplink port for easy expansion
- Auto-learning of network configuration
- Flow control in full duplex mode for protection against data loss
|
Frequently Bought Together
1. Vision Techconnect - Network cable - RJ-45 (M) to RJ-45 (M) - 3 m - UTP - CAT 6 - booted - white |
Product Specification
- Product Code
- H44178053
- Manufacturer Ref
- DES-1016D/B
- Barcode
- 790069221262
- No of Ports
- 16 Ports
- Brand
- D-Link
Product Details
- D-Link DES 1016D - Switch - unmanaged - 16 x 10/100 - desktop
All ports support auto-negotiation of MDI/MDIX cross over. This eliminates the need for cross over cables or uplink ports. Any port can simply plug to a server, a hub or a switch, using the usual straight-through twisted-pair cable. With 16 plug-and-play ports, the switch is a perfect choice for workgroups to upgrade performance in a client/server environment. The ports can be connected to servers in full duplex, or hubs in half-duplex.
With low-cost connection per-port, the switch can be setup for direct connection from the PCs. This relieves data bottleneck by giving each workstation a dedicated bandwidth on the network.
- Ease of use
The DES-1016D has 16 plug-and-play ports; the switch is a perfect choice for workgroups to upgrade performance in a client/server environment. The ports can be connected to servers in full-duplex, or hubs in half-duplex. - Auto speed sensing
The switch senses whether a network device is running at 10Mbps or 100Mbps and automatically adjusts for optimal performance. - Auto negotiation
Whether you are running at half- or in full-duplex, the switch automatically negotiates and runs the highest supported transmission rate. - Auto MDI/MDIX crossover
All ports support auto-negotiating MDI/MDIX detection, which eliminates the need for crossover cables or uplink ports. The DES-1016D is the perfect choice for Plug-and-Play support for 10BASE-T and 100BASE-T networks. - Wire-speed performance
The DES-1016D features a non-blocking wire-speed architecture, with a 3.2Gbps switching capacity, for maximum data throughput. The DES-1016D also features an integrated universal power supply, and per port diagnostics LEDs that make it easy to "spot check" for problems. With wire-speed filtering and store-and-forward switching, the DES-1016D maximizes network performance while minimizing the propagation of bad network packets.
Specifications
General | |
---|---|
Device Type | Switch - 16 ports - unmanaged |
Enclosure Type | Desktop |
Subtype | Fast Ethernet |
Ports | 16 x 10/100 |
MAC Address Table Size | 8K entries |
Features | Flow control, auto-sensing per device, auto-negotiation, auto-uplink (auto MDI/MDI-X), store and forward |
Compliant Standards | IEEE 802.3, IEEE 802.3u |
RAM | 512 KB |
Status Indicators | Collision status, port duplex mode, power, link OK, 100M device connected, link/activity |
Expansion / Connectivity | |
Interfaces | 16 x 100Base-TX RJ-45 |
Power | |
Power Device | Internal power supply |
Voltage Required | AC 120/230 V (50/60 Hz) |
Power Consumption Operational | 6 Watt |
Miscellaneous | |
Compliant Standards | FCC Class A certified, cUL, VCCI Class A ITE, CB |
Localisation | United Kingdom, Ireland |
Dimensions & Weight | |
Width | 28 cm |
Depth | 18 cm |
Height | 4.4 cm |
Weight | 2.8 kg |
Manufacturer Warranty | |
Service & Support | Limited warranty - 2 years |
Environmental Parameters | |
Min Operating Temperature | 0 °C |
Max Operating Temperature | 40 °C |
Humidity Range Operating | 5 - 90% |