Nuclias Connect DAP-X2850 - Radio access point - 2 ports - Wi-Fi 6 - 2.4 GHz, 5 GHz - wall / ceiling mountable
- Easy to manage with D-Link's free software-based management solution, Nuclias Connect
- Wi-Fi 6 ready: delivers greater network efficiency and lower latency, with nearly four times the capacity of previous Wi-Fi standards
- MU-MIMO slices through congestion, reducing wait time for all users
- Superior throughput with dual-band Wi-Fi offers high transfer speeds
- Coverage is shared more efficiently over more users with Airtime Fairness
- Band Steering intelligently manages users, pushing them onto the higher radio frequency when possible
- Two LAN ports (2.5 Gbps and 1 Gbps) offer expansive backhaul up to wired network, eliminating bottlenecks at the AP
- Support for Power of Ethernet 802.3at means less wires, for cleaner and easier deployment
- Stay secure with the latest WPA3 Personal & Enterprise wireless encryption
|
Product Specification
- Product Code
- H44343245
- Manufacturer Ref
- DAP-X2850
- Barcode
- 790069456947
- Alternative Code(s)
- IM-CA89208
- Type
- Radio Access Points
- Brand
- HuntOffice
Product Details
- Nuclias Connect DAP-X2850 - Radio access point - 2 ports - Wi-Fi 6 - 2.4 GHz, 5 GHz - wall / ceiling mountable
The Wi-Fi 6 ready DAP-X2850 is on hand to provide unbeatable speeds, greatly increased capacity and interference-free coverage throughout businesses, paired with the easy management of Connect.
- Wi-Fi that turbo boosts business performance
With the DAP-X2850 by your side, it's all systems go. It is fully prepared to handle all day-to-day demands of busy SMBs. Equipped with Wi-Fi 6, there are massive performance improvements, as well as all the features of 11ac now available for the 2.4 GHz band too. - Take a load off and let your AP do the hard work
The DAP-X2850's Load Balancing feature spreads the work load between two or more Access Points to get optimal resource utilization, throughput and response time, while Airtime Fairness helps distribute equal amounts of air time to each connected client. Band Steering auto-connects devices such as smart phones and tablets to the higher-capacity 5 GHz band while allowing devices 2.4 GHz-ready to remain. The result is a steady, consistent connection for each user - the perfect balancing act. - No-wait Wi-Fi even at peak time with MU-MIMO
Equipped with the latest 802.11ax MU-MIMO technology and 3600 Mbps throughput, delivering exceptional connectivity to more users and devices just got a lot easier. Your network will not balk, even at the busiest of times. - Your network, future proofed
Equipped with a 2.5 Gigabit Ethernet Port, the DAP-X2850 delivers exceptional multi-gigabit performance to support demand for better and faster Wi-Fi. Compatibility with standard 802.3at PoE+ is ideal for flexible deployment. No need to run extra power lines, no added hassle when configuring your hardwiring and no more cable clutter. Perfect for advanced installations in areas where power outlets are not readily available. - Multi-mode makes the most of your network capabilities
In order to achieve optimal network performance, the DAP-X2850 has several operational modes tailored to best fit the individual needs of your network. Access Point, Wireless Client, WDS (Wireless Distribution System), and WDS with Access Point modes allow for flexible, customizable deployment whatever your requirements. - Complete control over your network's access
Complete control comes as standard with the DAP-X2850. Combined with the Nuclias Connect Software, a variety of the latest in network security and management tools are at your fingertips. You can rest assured that the best of the best are hard at work keeping your network protected and hitch free.
Specifications
| General | |
|---|---|
| Device Type | Radio access point |
| Ruggedized Design | Indoor |
| Width | 21.24 cm |
| Depth | 21.24 cm |
| Height | 4.67 cm |
| Weight | 763.8 g |
| Networking | |
| Form Factor | Wall / ceiling mountable |
| Ports Qty | 2 |
| Connectivity Technology | Wireless |
| Data Link Protocol | IEEE 802.11b, IEEE 802.11a, IEEE 802.11g, IEEE 802.11n, IEEE 802.11ac, IEEE 802.11ax (Wi-Fi 6) |
| Network / Transport Protocol | POP3, HTTP, Telnet |
| Remote Management Protocol | Telnet, HTTP, SSH, LDAP, RADIUS |
| Frequency Band | 2.4 GHz, 5 GHz |
| Performance | Maximum data rate (2.4 GHz): 1147 Mbps ¦ Maximum data rate (5 GHz): 2400 Mbps |
| Wi-Fi Rating | AX3600 |
| Status Indicators | Power, status |
| Features | Wireless Distribution System (WDS) support, reset button, Traffic Control, Captive Portal, 802.1x authentication, MU-MIMO technology, band steering, Airtime Fairness, Energy-Efficient Ethernet (EEE), Target Wait Time (TWT) |
| Encryption Algorithm | 128-bit WEP, 64-bit WEP, SSL, WPA-Enterprise, WPA2-Enterprise, WPA3-Enterprise, WPA3-Personal, WPA2-Personal, WPA-Personal |
| Authentication Method | Secure Shell (SSH), RADIUS, Radio Service Set ID (SSID), LDAP |
| Compliant Standards | IEEE 802.3u, IEEE 802.3ab, IEEE 802.11b, IEEE 802.11a, IEEE 802.11g, IEEE 802.1x, IEEE 802.11n, IEEE 802.3at, IEEE 802.3az, IEEE 802.11ac, IEEE 802.11ax, Wi-Fi CERTIFIED 6 |
| Aerial | |
| Antenna | Internal |
| Antenna Qty | 4 |
| Expansion / Connectivity | |
| Interfaces | 1 x 1000Base-T - RJ-45 ¦ 1 x 1/2.5GBase-T (PoE+) - RJ-45 ¦ 1 x console - RJ-45 |
| Miscellaneous | |
| MTBF | 30,000 hour(s) |
| Compliant Standards | FCC |
| Power | |
| Power Over Ethernet (PoE) Supported | PoE+ |
| Power Consumption Operational | 19.44 Watt |
| Environmental Parameters | |
| Min Operating Temperature | 0 °C |
| Max Operating Temperature | 40 °C |
| Humidity Range Operating | 10 - 90% |
Product Reviews
View Expert Product Reviews reviews submitted by industry experts
View Customer Product Reviews reviews submitted by regular visitors who have used this product
