Polycell Stain Stop Paint 250ml
- Dries in 15 minutes (depending on conditions)
- For painted plaster, cement, stone and brick
- Use indoors and outdoors
- Covers pen, grease marks, nicotine & soot
- For a long lasting paint finish
|
Product Specification
- Product Code
- H44483458
- Manufacturer Ref
- 5084985
- Barcode
- 5010567131012
- Type
- Sealer Paint & Stain Blocks
- Brand
- Polycell
Product Details
- Polycell Stain Stop Paint 250ml
Specifications
Features | |
---|---|
Suitable for indoor use | Y |
Suitable for outdoor use | Y |
Volume | 0.25 L |
Drying time | 0.25 h |
Drying time note | Depending on conditions |
Number of coats (min) | 1 |
Number of coats (max) | 2 |
Recoat after | 0.25 h |
Surface preparation | Make sure the surface is clean, dry and free from loose particles and mould. Remove any wallpaper or loose paint. Fill holes or cracks with an appropriate Polycell Polyfilla and sand down well. Mask surrounding areas to protect from overspray. |
How to use | 1) Shake can well until you hear the steel pallet rattling and then continue for 1 more minute. 2) Spray evenly over the affected area from a distance of 20-30cm (9"-12") until the stain is covered. Shake can occasionally during use. 3) Allow to dry for at least 15 minutes. 4) A second coat may be required for especially stubborn stains; this should be applied once the first coat is fully dry. 5) Prime treated areas with a water-based paint if you are overcoating with a solvent-based paint. 6) Treated surfaces are now ready to decorate. |
How to store | Do not use or store in extremes of temperature and protect from frost |
Tool cleaning | Invert the can and spray until nozzle is cleared to prevent clogging |
Packaging data | |
Package width | 60 mm |
Package depth | 60 mm |
Package height | 200 mm |
Packaging content | |
Quantity per pack | 1 pc(s) |
Logistics data | |
Layers per pallet | 5 pc(s) |
Products per pallet layer | 300 pc(s) |
Products per pallet | 1500 pc(s) |