Wurth Battery/Charging System Tester - BTRY-DYNAMOTEST-W.PRINTER-CASE-12V Ref. 0964772800

All common battery types can be tested
VRLA/GEL/AGM/SLA/SLI/CALCIUM

Reverse polarity protection
Prevents accidents when connecting the terminal clips

No need to remove the battery
Minimal time and effort required

Checking of battery output in just seconds
Battery tests can be carried out with the customer present and necessary measures can be decided on immediately

Voltage measurement from 1.5 V
Can also be used with exhausted batteries down to 1.5 V

Integrated thermal printer
No need to change ink ribbons
Multiple printing possible
Battery test can be documented

Own energy source
Test does not affect charge state of battery
16-digit LCD display with background lighting
Display can be adjusted to the lighting conditions
Multi-language menu guidance and printout (GB/FR/ES/DE/IT/PT/JP)
Time/date can be set

Device automatically adjusts the test criteria and test time
Operating errors are avoided

Battery state is indicated from "Good & Passed" to "Defective/Replace" or "Cell Defective"
Clear test results
No misinterpretation

Test standards: SAE/EN/IEC/DIN/JIS

Test range:
40–2000 CCA (SAE)
40–2100 CCA (EN)
30–1500 CCA (IEC)
25–1300 CCA (DIN)
Due to battery type (JIS)

Measurement tolerances:
±5% cold starting current (CCA)
±0.05 V

Power supply:
4 x 1.5 V alkaline batteries type LR6 - AA (for approx. 500 print-outs)
Temperature range: 0 to 50°C
Dimensions: 250 x 135 x 65 mm
Cable length: approx. 1.7 m
Weight: 1000 g