Avago - QSFP28 transceiver module - 100 Gigabit Ethernet - 100GBase-SR4 - MPO multi-mode - 850 nm
- Compliant to 100GbE electrical and optical specifications 802.3bm (Annex 83E CAUI-4 with Clause 91 RS-FEC, Clause 95 100GBASE-SR4)
- 100GbE Link Distances 300m OM4, 200m OM3
- QSFP28 MSA Specification Compliant, including new functions per SFF-8636 Rev 2.4
- Class 1 eye safety
- Pull tab: ease of transceiver insertion and extraction; tab color coded "Orange" for Extended Reach identification
- Operates at 25.78125 Gbps per channel with 64b/66b coded data
- 0°C to +70°C case temperature operating range
- Proven High Reliability 850 nm technology: Avago VCSEL transmitter and Avago PIN detector
- Hot pluggable QSFP28 transceiver for ease of installation and servicing
- Two Wire Serial (TWS) interface with Digital Monitoring and maskable interrupts for expanded functionality
|
Product Specification
- Product Code
- H44375797
- Manufacturer Ref
- AFBR-89CDHZ
- Barcode
- 8592978356194
Product Details
- Avago - QSFP28 transceiver module - 100 Gigabit Ethernet - 100GBase-SR4 - MPO multi-mode - 850 nm
The Avago Technologies AFBR-89CDHZ is a Four-Channel, Pluggable, Multi-mode, Fiber-Optic QSFP28 transceiver for 100 Gigabit Ethernet Applications. This transceiver is a high performance module for short-range multi-lane data communication and interconnect applications. It integrates four data lanes in each direction with each lane operating at 25.78125 Gbps, giving an aggregated bandwidth of 103.125 Gbps. It allows optical interoperability up to 300m over an 8-fiber (or 12-fiber) MPO optical multi-mode OM4 cable. The pull tab facilitates the insertion and extraction of these transceivers in high density environment. Each electrical lane operates at 25.78125 Gbps and conforms to the 100GE CAUI4 interface with 802.3 Clause 91 RS-FEC.
Per channel transmitter and receiver retimers, configured for 4x25G operation, can be bypassed to enable alternative data rate transmission.
These modules are designed to operate over multimode fiber systems using a nominal wavelength of 850 nm. The electrical interface uses a 38 contact QSFP28 edge type connector. The optical interface uses a conventional 8-fiber (or 12-fiber) MPO connector. This module incorporates Avago Technologies proven integrated circuit and VCSEL technology to provide reliable long life, high performance, and consistent service.
Per channel transmitter and receiver retimers, configured for 4x25G operation, can be bypassed to enable alternative data rate transmission.
These modules are designed to operate over multimode fiber systems using a nominal wavelength of 850 nm. The electrical interface uses a 38 contact QSFP28 edge type connector. The optical interface uses a conventional 8-fiber (or 12-fiber) MPO connector. This module incorporates Avago Technologies proven integrated circuit and VCSEL technology to provide reliable long life, high performance, and consistent service.
Specifications
| General | |
|---|---|
| Device Type | QSFP28 transceiver module |
| Form Factor | Plug-in module |
| Networking | |
| Connectivity Technology | Wired |
| Cabling Type | 100GBase-SR4 |
| Data Link Protocol | 100 Gigabit Ethernet |
| Data Transfer Rate | 103.125 Gbps |
| Optical Wave Length | 850 nm |
| Features | Hot swap module replacement, Digital Optical Monitoring (DOM) support, Vertical Cavity Surface Emitting Laser (VCSEL), multi-segment analysis (MSA), 4 channels, orange pull tab |
| Compliant Standards | IEEE 802.3bm |
| Expansion / Connectivity | |
| Interfaces | 1 x Ethernet 100GBase-SR4 - MPO multi-mode |
| Miscellaneous | |
| Compliant Standards | OM4, OM3, MSA SFF-8636 |
| Dimensions & Weight | |
| Width | 12.231 cm |
| Depth | 1.835 cm |
| Height | 1.29 cm |
| Environmental Parameters | |
| Min Operating Temperature | 0 °C |
| Max Operating Temperature | 70 °C |
Product Reviews
View Expert Product Reviews reviews submitted by industry experts
View Customer Product Reviews reviews submitted by regular visitors who have used this product
