Extreme Networks Ethernet Routing Switch 3600 3626GTS-PWR+ - Switch - L3 - Managed - 24 x 10/100/1000 (PoE+) + 2 x combo Gigabit SFP + 2 x 10 Gigabit SFP+ (uplink) + 2 x 10 Gigabit SFP+ (uplink / stacking) - rack-mountable - PoE+ (720 W) - with 90 days Po
|
Product Specification
- Product Code
- 4811822
- Manufacturer Ref
- AL3600A15-E6
- Barcode
- 644728038251
Product Details
- Extreme Networks Ethernet Routing Switch 3600 3626GTS-PWR+ - Switch - L3 - Managed - 24 x 10/100/1000 (PoE+) + 2 x combo Gigabit SFP + 2 x 10 Gigabit SFP+ (uplink) + 2 x 10 Gigabit SFP+ (uplink / stacking) - rack-mountable - PoE+ (720 W) - with 90 days Po
The ERS 3626GTS-PWR+ features 24 access ports of 1000BASE-T Gigabit Ethernet with RJ45 interfaces; these ports also support 10/100Mbps connectivity. Two of these ports are configured in combination with SFP sockets for flexible use as Gigabit uplinks. Two SFP+ interfaces provide 10 Gigabit network uplink connectivity. There are also two additional interfaces that can be used for either Stackable Chassis virtual backplane links or additional network uplinks.
- Always-on
Stackable Chassis delivers a best-in-class high-availability solution, featuring hot-swappable unit replacement. - Convergence-ready
Support for PoE/PoE+, optimized for high-definition video surveillance, true plug-and-play capabilities for communications, collaboration, and engagement deployments, and advanced QoS capabilities. - Powerful
Wire-speed performance, truly scalable virtual backplane capabilities, delivering high throughput to support large-scale deployments. - Highly secure
Standards-based 802.1X Network Access Control can also be integrated with Extreme Networks's Identity Engines technology for centralized, policy-based authenticated network access. - Fabric-enabled
Supporting Extreme Networks's Fabric Attach technology to empower a seamless transition to an agile, software-defined virtualized networking solution. - Energy efficient
Focusing on end-to-end energy efficiency, dynamic Energy Saver further reduces power consumption for both the Ethernet Switch and IP phones without impacting service availability.
Specifications
General | |
---|---|
Device Type | Switch - 26 ports - L3 - Managed - stackable |
Bundled Services | 90 days Post-Purchase Advanced Technical Support |
Enclosure Type | Rack-mountable |
Subtype | Gigabit Ethernet |
Ports | 24 x 10/100/1000 (PoE+) + 2 x combo Gigabit SFP + 2 x 10 Gigabit SFP+ (uplink) + 2 x 10 Gigabit SFP+ (uplink / stacking) |
Power Over Ethernet (PoE) | PoE+ |
PoE Budget | 720 W |
Performance | Switching fabric bandwidth (full-duplex): 128 Gbps ¦ Forwarding performance: 95 Mpps ¦ Latency (64-byte packets): 3.5 µs ¦ Jitter (64-byte packets): 0.84 µs |
Capacity | MLT/LACP groups: 6 ¦ Virtual interfaces (VLANs): 256 ¦ Multiple Spanning Tree Protocol instances: 8 ¦ Links per MLT/LACP group: 4 ¦ DHCP snooping entries: 512 ¦ 802.1X clients: 32 ¦ LLDP neighbors: 816 ¦ ARP entries: 512 ¦ Static ARP entries: 256 ¦ IP interfaces: 64 ¦ IP route policies: 64 ¦ IPv4 routes: 256 ¦ IPv4 routes (static): 32 ¦ RIP interfaces: 16 ¦ RIP routes: 256 ¦ IGMP enabled VLANs: 256 ¦ RMON entries per port: 4 groups ¦ IP multicast groups: 248 ¦ QoS precedences: 8 ¦ QoS filters per switch per precedence: 256 |
MAC Address Table Size | 16000 entries |
Jumbo Frame Support | 9216 bytes |
Max Units In A Stack | 8 |
Routing Protocol | RIP-1, RIP-2, static IP routing |
Remote Management Protocol | RMON |
Features | ARP support, trunking, auto-uplink (auto MDI/MDI-X), port mirroring, IPv6 support, half duplex mode, full duplex mode, Spanning Tree Protocol (STP) support, Multiple Spanning Tree Protocol (MSTP) support, DHCP snooping, Quality of Service (QoS), MLD snooping, LACP support, LLDP support, Neighbor Discovery Protocol (NDP), non blocking ports, IP source guard, RA guard, First Hop Security (FHS), support Fabric Attach, DHCPv6 guard |
Compliant Standards | IEEE 802.1Q, IEEE 802.3af, IEEE 802.3ad (LACP), IEEE 802.1x, IEEE 802.1ab (LLDP), IEEE 802.3at |
Expansion / Connectivity | |
Interfaces | 2 x Gigabit LAN SFP ¦ 24 x 1000Base-T RJ-45 PoE+ - 30 W ¦ 1 x console RJ-45 management ¦ 1 x USB ¦ 2 x 10Gbit LAN SFP+ uplink ¦ 2 x 10Gbit LAN SFP+ uplink/stacking |
Power | |
Power Device | Internal power supply |
Voltage Required | AC 120/230 V |
Miscellaneous | |
MTBF | 136,469 hours |
Compliant Standards | VCCI, BSMI, CISPR 24, NOM, IEC 60950, EN55024, CISPR 22, CB, EN 61000-4-4, EN 61000-4-2, EN 61000-4-3, EN 61000-4-6, CCC, EMC, ICES-003 Class A, EN 61000-4-5, EN 61000-4-11, EN 61000-4-8, UL 60950-1, EN 60950-1, ANATEL, FCC Part 15 B Class A, KC, EMI, EAC, CNS 13438, CSA 22.2 No. 60950-1, EN 55022 Class A, CNS 14336-1, ACMA RCM |
Software / System Requirements | |
Software Included | Base Software License |
Dimensions & Weight | |
Width | 44 cm |
Depth | 28 cm |
Height | 4.4 cm |
Manufacturer Warranty | |
Service & Support | Limited warranty - lifetime - response time: next business day ¦ New releases update - software - lifetime ¦ Technical support - lifetime |
Environmental Parameters | |
Min Operating Temperature | 0 °C |
Max Operating Temperature | 50 °C |
Humidity Range Operating | 0 - 95% (non-condensing) |
Min Storage Temperature | -40 °C |
Max Storage Temperature | 70 °C |
Humidity Range Storage | 10 - 95% (non-condensing) |